Electronics

Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip Includes: 1 x NTK LZA08-H5 Wideband Sensor - modified Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units.

Read more less

Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted inside your engine bay Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide. Notes: Best product for methanol powered vehicles

Read more less

Suits: Haltech Nexus or Elite Series ECU's Includes: 1 x Haltech PD16, 1 x SurLok 120A Connector Red, 1 x USB Key, 1 x USB-C Cable, 1 x USB-C Dust Cap, 1 x Haltech Fabric Keytag, 1 x Quick Start Guide Booklet, Mounting Hardware - (2 x M5 Bolts and Nuts) and Plug and Pin Set to suit Notes: The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. Designed to integrate seemlessly into your existing Haltech Elite or Nexus engine management system, the PD16 delivers safe, dependable power delivery to your vehicle. FEATURES 10 x High Side Outputs 2 x Half Bridge Outputs 4 x 25A High Current Outputs 8 x Inputs + Dedicated Ignition Switch Input Power for Ignition Switch Integrated into Haltech CAN Bus Network 5V Sensor Supply / Sensor Ground 120A SurLok Connector

Read more less

Suits: Haltech Nexus or Elite Series ECU's Includes: 1 x Haltech PD16, 1 x SurLok 120A Connector Red, 1 x USB Key, 1 x USB-C Cable, 1 x USB-C Dust Cap, 1 x Haltech Fabric Keytag, 1 x Quick Start Guide Booklet, Mounting Hardware - (2 x M5 Bolts and Nuts) Notes: The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. Designed to integrate seemlessly into your existing Haltech Elite or Nexus engine management system, the PD16 delivers safe, dependable power delivery to your vehicle. FEATURES 10 x High Side Outputs 2 x Half Bridge Outputs 4 x 25A High Current Outputs 8 x Inputs + Dedicated Ignition Switch Input Power for Ignition Switch Integrated into Haltech CAN Bus Network 5V Sensor Supply / Sensor Ground 120A SurLok Connector

Read more less

Suits: All currrent Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs. Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag DASH OVERVIEW With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-colour shift light bar, the iC-7 connects directly to all current Haltech ECUs via a CAN network. Ideal replacement for individual analogue gauge clusters. Easy to install and configure. User adjustable brightness control with automatic dimming. User configurable channels, units and alarms. 14 programmable, seven colour shift light LEDs. Controlled via easily accessible, face-mounted control buttons. Configuration via Haltech iC-7 software and USB cable.

Read more less

Outputs: Up to 8 injector and 8 ignition. Suits: Universal 1-12 cylinder or 2-4 rotor applications. Includes: Elite 2500 ECU Plug and Pin Set to suit Notes: Ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts. ECU OVERVIEW Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed water resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 12 Cylinder engines 2 to 4 Rotor engines Normally aspirated or forced induction Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) Staged, Sequential, semi sequential, batch or multipoint injection patterns Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems Connect to a wide range of display dashes and expansion devices via CAN. Waterproof Case (With Pocket Cover Fitted) 8 x Fuel Injection Outputs 8 x Ignition Outputs 12 x Digital Outputs 10 x Analogue Voltage Inputs 4 x Synchronised Pulsed Inputs 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor) 2 x Dedicated Engine Position Inputs with extensive trigger type support Up to 45 channels of Input & Output (I/O) expansion (via CAN) USB Laptop communication (Windows) NSP Calibration Software - Intuitive and easy to use

Read more less

Outputs: Up to 8 injector and 8 ignition. Suits: Universal 1-12 cylinder or 2-4 rotor applications. Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable and USB Software Key. Notes: Ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts. ECU OVERVIEW Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed water resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 12 Cylinder engines 2 to 4 Rotor engines Normally aspirated or forced induction Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) Staged, Sequential, semi sequential, batch or multipoint injection patterns Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems Connect to a wide range of display dashes and expansion devices via CAN. Waterproof Case (With Pocket Cover Fitted) 8 x Fuel Injection Outputs 8 x Ignition Outputs 12 x Digital Outputs 10 x Analogue Voltage Inputs 4 x Synchronised Pulsed Inputs 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor) 2 x Dedicated Engine Position Inputs with extensive trigger type support Up to 45 channels of Input & Output (I/O) expansion (via CAN) USB Laptop communication (Windows) NSP Calibration Software - Intuitive and easy to use

Read more less

Outputs: Up to 4 injector and 4 ignition. Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and USB Software Key, Plug and Pin Set to suit Notes: Available with universal wiring, terminated engine harnesses or model-specific Plug'n'Play adaptor kits. ECU OVERVIEW Featuring a robust, environmentally sealed, water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 12 cylinder engines 2 rotor engines Normally aspirated or forced induction Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) Staged, sequential, semi sequential, batch or multipoint injection patterns Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems Connect to a wide range of display dashes and expansion devices via CAN. 4 x fuel injection outputs 4 x ignition outputs 12 x digital outputs 10 x analogue voltage inputs 4 x synchronised pulsed inputs 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor) 2 x dedicated engine position inputs with extensive trigger type support Up to 45 channels of Input & Output (I/O) expansion (via CAN) USB laptop communication (Windows) ESP Calibration Software - intuitive and easy to use

Read more less

Outputs: Up to 4 injector and 4 ignition. Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and USB Software Key. Notes: Available with universal wiring, terminated engine harnesses or model-specific Plug'n'Play adaptor kits. ECU OVERVIEW Featuring a robust, environmentally sealed, water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Supports 1 to 12 cylinder engines 2 rotor engines Normally aspirated or forced induction Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) Staged, sequential, semi sequential, batch or multipoint injection patterns Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems Connect to a wide range of display dashes and expansion devices via CAN. 4 x fuel injection outputs 4 x ignition outputs 12 x digital outputs 10 x analogue voltage inputs 4 x synchronised pulsed inputs 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor) 2 x dedicated engine position inputs with extensive trigger type support Up to 45 channels of Input & Output (I/O) expansion (via CAN) USB laptop communication (Windows) ESP Calibration Software - intuitive and easy to use

Read more less

Suits: Racing application where advanced race features, data logging and power management control is required. Includes: NEXUS R5 VCU, SurLok connectors (Red and Black), Wi-Fi antenna, mounting bolts, USB-C Cable, USB-C dust cap, USB drive with NSP Software. Plug and pin set: AMP 26 pin key 1 and 3, 34 pin key 1 and 2, DTP-4. Plug and Pin Set - Suits Nexus R5 use in converting an existing loom to suit NEXUS R5 applications. VCU OVERVIEW NEXUS R5 is the new Haltech flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc) 18 x peak/hold injector drivers (can be used as low side drive outputs) 12 x low current ignition outputs (can be used as low side drive outputs) 8 x low side drive outputs, PWM capable (DPOs) 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs 2 x onboard wideband controllers, supporting NTK and LSU4.9 3 x CAN ports with switchable termination

Read more less

Outputs: Up to 18 injector and 12 ignition Suits: Racing application where advanced race features, data logging and power management control is required. Includes: NEXUS R5 VCU, SurLok connectors (Red and Black), Wi-Fi antenna, mounting bolts, USB-C Cable, USB-C dust cap, USB drive with NSP Software. VCU OVERVIEW NEXUS R5 is the new Haltech flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc) 18 x peak/hold injector drivers (can be used as low side drive outputs) 12 x low current ignition outputs (can be used as low side drive outputs) 8 x low side drive outputs, PWM capable (DPOs) 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs 2 x onboard wideband controllers, supporting NTK and LSU4.9 3 x CAN ports with switchable termination

Read more less

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug and play control solution for your Haltech system. Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier ECUs

Read more less

The Haltech CAN Keypad is a plug and play control solution for your Haltech system. With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier ECUs

Read more less

The Haltech CAN Wideband Controller allows the user to accurately measure air/fuel ratios over a wide range from rich to lean via the Haltech CAN system for precise engine tuning LENGTH: 1.2M (4ft) INCLUDES: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide. NOTES: The ideal CAN expansion accessory for all Elite Series ECUs.

Read more less

Suitable for all applications that require a digital speed signal Outputs: 0V to 12V Pulsed Output Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology.

Read more less