This sub-harness plugs into the oil pressure sensor connector in the main harness and allows monitoring of oil pressure in applications that use a sensor with a Metri-Pak style connector.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
Note: Oil temperature cannot be monitored with this adapter harness.
Correct replacement 20A micro relay for our main harnesses.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
This harness allows logging and monitoring of tunnel pressure when using our Yamaha WaveRunner harness.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
Please refer to the main harness documentation for proper ECU pin settings and calibration.
This kit contains a popular MAC 3-port solenoid with an aluminum mounting bracket and stainless steel hardware.
It features a connector that fits our harnesses for a clean installation.
Correct replacement 35A relay for our main harnesses.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
This harness allows connecting to a Bosch-style two-wire knock sensor when using our Yamaha WaveRunner harness.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
Please refer to the main harness documentation for proper ECU pin settings and calibration.
This bracket was developed for our watercraft applications that run the Fueltech FT550 ECU and it is sturdy yet lightweight, made of CNC billet aluminum.
It features a modular design that allows mounting our 48-position relay box on one side and the other side features provisions for mounting a Yamaha starter solenoid, our solid-state main relay, and an auxiliary fuel pump relay. One side is angled to clear the contour of most Yamaha jetski watercrafts.
Comes with stainless installation hardware.
Camshaft position Sensor connector kit for Yamaha Waverunners with the 1.8L HO and SVHO engines. This is the connector on the engine harness side.
A complete kit contains:
1 connector G4
3 red seals A34
3 female contacts B15
Yamaha Waverunner 1.8L crankshaft position sensor connector kit. This is the harness-side connector.
This kit is the engine harness side of the crank position sensor connector assembly.
A complete kit contains:
1 connector G1
2 red seals A34
2 female contacts B16
This adapter connector allows turning on the ignition system on our Yamaha harnesses when performing firmware upgrades, datalogging or any operation that requires the system to be powered without the engine turning.
Also allows connecting to the ECU via Wi-Fi during tuning sessions without the need for a USB cable.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
This bracket was developed for our watercraft applications that run the Haltech Nexus S2 ECU and it is sturdy yet lightweight, made of CNC billet aluminum.
It features a modular design that allows mounting our 48-position relay box on one side and the other side features provisions for mounting a Yamaha starter solenoid, our Ride controller and an auxiliary fuel pump relay. One side is angled to clear the contour of most Yamaha jetski watercrafts.
Comes with stainless installation hardware. (ECU and solenoid not included)
Connects to our main harness on the Yamaha GP1800 and FX series and enables the use of a nitrous solenoid and also provides a connection for a nitrous pressure sensor to the ECU.
This connector fits the older style Yamaha Waverunners Ride motor on the engine harness side.
A complete kit contains
1 connector N13
16 seals A50
16 contacts + 1 extra B35
12 cavity plugs A52
This connector is intended to keep the harness waterproof in applications that use the OEM Yamaha CAN bus based dash for display. Since the OEM dash connects directly to the buzzer, the connector on the harness needs a sealing plug to remain waterproof.
See main harness instructions for how to use this connector.
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
This connector is intended to keep the harness waterproof in applications that do not have a flex fuel sensor installed
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
This connector is intended to keep the harness waterproof in applications that do not have a Haltech dash installed
Fits:
Yamaha GP1800 series main harness
Yamaha FX series main harness
Yamaha FZR series main harness
